|
|
Mathematical models of retention object of urban drainage
Pavlík, Ondřej ; Stanko,, Ing Štefan (referee) ; Pollert,, Jaroslav (referee) ; Prax, Petr (advisor)
This work deals with the use of 3D mathematical models of fluid in water management practice. Using 3D mathematical model was assessed retention tank Jeneweinova, which is situated on a sewer network of the city of Brno and is an important object of urban drainage. Retention basin designed to keep overflow from CSO chambers to Svratka and Svitavský náhon during storm events. Retention tank Jeneweinova is suitable for the assessment, because tank was designed bassed the Master Plan drainage of Brno using 1D mathematical model. Another factor was the physical model, which was build in LVV Vin FAST BUT. And finally, near the retention tank will be installed measurement on the sewerage network, which will be able to verify the results whitch has been predicted in this work. Mathematical model of retention tanks Jeneweinova was build in software FLOW-3D. FLOW-3D is a general purpose CFD (Computational Fluid Dynamics) software for flow of fluid in steady and unsteady mode and uses computational techniques to solve the equations of motion of fluids. This software is mainly used for the calculation of hydraulic fluids, gas flow and heat transfer simulations. Results from 3D mathematical model has been compared with the values in the physical and 1D mathematical model.
|
|
|
Assessment of hydraulic reliability of drainage system in urban area and solution of extra-urban storm water.
Šebek, Josef ; Macsek, Tomáš (referee) ; Hlavínek, Petr (advisor)
This diploma thesis presents the topic of urban drainage systems. The first theoretical part contains methods and options for urban drainage systems, stormwater management, blue-green infrastructure (BGI) in urban areas and introduction of numerical modelling of sewerage systems. The application of modelling platforms is further described in the feasibility study in the practical part of this thesis. By using the simulation model, the study assesses the hydraulic reliability of the drainage system in the city of Jedovnice in the Czech Republic, identifies hydraulic issues and their causes on the urban drainage system. The second part of the study assesses extra-urban stormwater inflow from fields around the city caused by heavy rainfalls, which causes local flooding in the urban area. The identification as well as proposed solutions and capital expenditures, their comparison and recommendation of the optimal solution are included in the study.
|
|
|
Assessment of hydraulic reliability of drainage system in urban area and solution of extra-urban storm water.
Šebek, Josef ; Macsek, Tomáš (referee) ; Hlavínek, Petr (advisor)
This diploma thesis presents the topic of urban drainage systems. The first theoretical part contains methods and options for urban drainage systems, stormwater management, blue-green infrastructure (BGI) in urban areas and introduction of numerical modelling of sewerage systems. The application of modelling platforms is further described in the feasibility study in the practical part of this thesis. By using the simulation model, the study assesses the hydraulic reliability of the drainage system in the city of Jedovnice in the Czech Republic, identifies hydraulic issues and their causes on the urban drainage system. The second part of the study assesses extra-urban stormwater inflow from fields around the city caused by heavy rainfalls, which causes local flooding in the urban area. The identification as well as proposed solutions and capital expenditures, their comparison and recommendation of the optimal solution are included in the study.
|
|
|
Impact of urbanization on ecological status of the Smržovský creek
Polák, Michal ; Komínková, Dana (advisor) ; Libuše, Libuše (referee)
This thesis handle with the ecological status of Smržovka stream, respectively handle with change of the ecological state of stream due to urbanization. Smržovka stream, concretely the right tributary of significant river Kamenice Jizerské hory Mountains rises in the Jizerské hory Mountains protected landscape area, which is almost intact due to water pollution and gradually flows through an urbanized area with a relatively high level of infrastructure and sources of pollution. For the
ecological status assessment of stream were used the following three indicators: hydromorphological mapping, physico-chemical water analysis and evaluation of
biological components of makrozoobenthos in terms of saprobity. The work provides information on water quality in the stream with that this unique data can be the basis
for the study of other small streams that spring in urban mountainous areas.
|
|
|
Hospodaření s dešťovou vodou ve městech
Vacková, Michaela
The paper is focused on new approaches of stormwater management in cities, decentralized urban drainage systems and reasons that lead to emergence of these systems. The relationship between them and urban planning. As a part of the paper there is the example, in which the relationships are verified.
|
|
|
Mathematical models of retention object of urban drainage
Pavlík, Ondřej ; Stanko,, Ing Štefan (referee) ; Pollert,, Jaroslav (referee) ; Prax, Petr (advisor)
This work deals with the use of 3D mathematical models of fluid in water management practice. Using 3D mathematical model was assessed retention tank Jeneweinova, which is situated on a sewer network of the city of Brno and is an important object of urban drainage. Retention basin designed to keep overflow from CSO chambers to Svratka and Svitavský náhon during storm events. Retention tank Jeneweinova is suitable for the assessment, because tank was designed bassed the Master Plan drainage of Brno using 1D mathematical model. Another factor was the physical model, which was build in LVV Vin FAST BUT. And finally, near the retention tank will be installed measurement on the sewerage network, which will be able to verify the results whitch has been predicted in this work. Mathematical model of retention tanks Jeneweinova was build in software FLOW-3D. FLOW-3D is a general purpose CFD (Computational Fluid Dynamics) software for flow of fluid in steady and unsteady mode and uses computational techniques to solve the equations of motion of fluids. This software is mainly used for the calculation of hydraulic fluids, gas flow and heat transfer simulations. Results from 3D mathematical model has been compared with the values in the physical and 1D mathematical model.
|
guest ::
